LED has become popular in recent years, replacing fluorescent lamps. Unlike traditional fluorescent lamps, it can expand the possibilities of effective space creation due to its power-saving performance and low exchange frequency as well as being able to create a variety of colors.
Moreover, such possibilities expand even more by combining it with transparent acrylics.
▲High-transparent urethane resin casting + LED unit
6 layers of 10t transparent acrylic material and 10t glass-colored acrylic material have been put on top of each other and champagne plates, our original product, have been used for the uppermost and lowermost parts to create the perspective of bubbles.
For LED as a light source, white LED has been installed on the counter side to flatter the bubbles of the champagne plates.
The half-bubble plate, our original product, has been used as a creative material for a wine shop to create a sparkling design.
For LED as a light source, thin (8mm) white LED has been installed on the top of the plate and color films have also been used to recreate the colors of red, pink and gold.
We manufactured a special base plate to meet following customer requests. LEDs needs to be installed in the channel letters of the mirrored stainless-steel and the depth of the channel letters has to be 20mm, which the half transparent acrylic covers the front.
White LED’s pitch was 10mm and 100V. Thanks to the considerations of the client and designer (architect), the width dimension was made constant to cut down the total cost.
Wall Sign Plate
We have produced a thin sign plate 10mm thick made by combining light reflector, half transparent acrylic material and metal outline characters/letters on a silk-printing light guide plate.
As for LED being a light source, 8mm thick white LED has been installed on the top of the plate to make it a sign that emits light out of the outline characters. With this configuration, no inspection opening nor work associated with FL tubes is necessary, allowing construction fees to be reduced.
We have come up with everything including the design based on the promotional image of bottles. To lighten on the front surface of the bottle, the angle has been adjusted by attaching a lens on the LED chip placed inside the bottom base. Moreover, the design on the back features the champagne plate, our original product. Light guide plate and white LED are used to generate a surface emission of the green color.